• Jan 28, 2026
  • 0 comments

TINHIFI T6 An Experiment That Went Beyond

Reviewed by Mr.HiAudio

 

Pros
- Pronounced sub-bass (for electronics)
- Sound customization(nozzle, foam and mesh)
- Unusual configuration (usually BA)
- Compact shell and comfortable fit
- Wide soundstage (w/o foam in nozzle)
Cons
- Pronounced sub-bass (sometimes too much)
- Average mids
- Brigh with black nozzle(no damping nozzle)
Hello! 

This review will be brief, but I'll try to convey my impressions.


- The set of accessories is of a good standard, I would especially like to mention the additional kits (!) for sound tuning
IMG_20260115_154211.jpg
- The cable is carefully made, a bit rough, but I think it will soften a bit over time. Sound-wise, the cable emphasizes the midrange a bit, making the headphones sound a bit bright.

- Shell is made of aluminum, front part is wood and coated with UV resin. Iem shell compact and rounded, making it suitable for those with smaller ears.

- Nozzles are easy to change and are fixed perfectly.
IMG_20260115_154303.jpg
- Regarding the pressure relief system(APC), I couldn't find the mechanism INFO, but the overall sound insulation is above average; sometimes, when inserting the earphone into the ear, the membrane inside makes a clicking sound. A mesh to replace this system is also included in the kit.
IMG_20260115_154338.jpg
IMG_20260115_154344.jpg
-Sound and tuning-
t6.jpg
My recommendation: give the headphones at least 4 hours to warm up, bcz OOB bass is TOO MUCH 

Let's decide on the sound guides: I recommend testing them all, but I chose the default green one and also removed the foam from the nozzle.
Music source: Hiby R3 Pro-ii and Fiio BTR17.

- BASS

The bass is deep and the sub-bass is pronounced, so vibrations will be at the level of a bone conduction driver. This is acceptable for electronic music or rock, but for more subdued genres (or if you simply don't like huge bass), it will be too much.

- MIDS

Midrange: I liked the drum response the most – it's fast and tight. As for the midrange... It's there, and in the stock version (with foam), it's smoothed out, with a bit of warmth and weight, while the upper mids can be a bit bright. Removing the foam makes the midrange more detailed and sharp, but there will still be a slight synthetic edge, although not always. I'd also note that without foam, the planar radiating element will be more active in the midrange, providing more detail and punch in the upper mids.

- HIGHS AND SOUNDSTAGE

The foam in the sound duct significantly dampens high frequencies and their reverberation, so I recommend removing the foam, and the sound will be transformed: precise and punchy highs, plenty of air, and a much wider and more spacious soundstage. It seems to me that the foam "turns off" the planar.

- What about other nozzle?..
IMG_20260115_154419.jpg
IMG_20260115_154433.jpg
- Black is too much bright and i can`t listen it normally
- Pink is too weak and too much bass
- Tips?????

Liquid silicone M size is too big for me and har to use it, s is so small...
I would also like to point out that the standard M size is covered in "synthetic hairs" from the packaging itself - you have to wash the ear pads first (very difficult)
Leave a comment